TSK-FM5950.01A Handling non-leaking fluorescent light ballasts
Effective Date: January 4, 2000, Revised April 27, 2007
Approved by: Director of Facilities Management
See Also
POL-U5950.01
POL-U5950.05
POL-U5950.06
Task Outline
To change a NON-LEAKING fluorescent light ballast, the Maintenance Mechanic or Electrician shall do the following:
- Assemble the following items:
- Light source
- Lock and tag
- Safety goggles or face shield
- Plastic-lined 5-gallon metal pail from FM Marshalling Building
- Use Lockout/Tagout procedures: LOCKOUT and TAGOUT the main panel -OR- LOCKOUT and TAGOUT all switches that control the circuits being worked on.
- Put on goggles or a face shield when work is directly under the fixture.
- Remove the old ballast and insert a new one.
- Dispose of the ballast properly:
- If the ballast is marked “NO PCBs” dispose of it in the Non-PCB Barrel at FM Marshalling Building.
- If the ballast is NOT marked, place the ballast into a plastic-lined, 5-gallon metal pail.
- If a pail is needed, obtain from FM Marshalling Building or call Environmental Health and Safety, x3064.
- Remove the lock on panel or lock and tag on all switches.
- Transport the pail with the ballast to Facilities Management.